|
In Wall and In Ceiling Speakers
VR6-C - Hi Vi Swan In-Ceiling Speakers
Features:
- 6.5" 2-way In-Ceiling Speaker
- SHIPPED WITH GRILLES, FRAMES, CUTOUT TEMPLATE, MANUAL AND PAINT MASK
|
Specifications
Woofer: 6.5" Nomex "Stratum" cone, rubber surround, 18.5oz Magnet, 1" voice coil, bumped back plate, vented pole piece
Tweeter: Swivel 30 degrees, 1" Silk dome, Ferro-fluid cooled, Neodymium magnet, wide dispersion Crossover: Phonalic PCB board, 6dB woofer section, 12dB tweeter section, Polymide auto protective switch for tweeter
Frequency Response: 45Hz- 20KHz
Sensitivity: 86dB
Recommended amplifier power: 10-100 watts
Impedance: 8 ohm
Cut Out size: 205mm
|
VR6-SC - Hi Vi Swan In-Ceiling Speakers
Features:
- 6.5" 2-way Stereo In-Ceiling Speaker
- SHIPPED WITH GRILLES, FRAMES, CUTOUT TEMPLATE, MANUAL AND PAINT MASK
|
Specifications
Woofer: 6.5" Nomex "Stratum" cone, rubber surround, 18.5oz magnet, 1" voice coil, bumped back plate, vented pole piece
Tweeters: Dual 0.8" Silk domes, Ferro-fluid cooled, Neodymium magnet, wide dispersion
Crossover: Phonalic PCB board, 12dB woofer section, 12dB tweeter section, Polymide auto protective switch for tweeters
Frequency Response: 40Hz- 20KHz
Sensitivity: 85dB
Recommended amplifier power: 10-60 watts per channel
Impedance: 8 ohm
Cut Out Size: 8.07"
|
VR8-C - Hi Vi Swan In-Ceiling Speakers
Features:
- 8" 2-way In-Ceiling Speaker
- SHIPPED WITH GRILLES, FRAMES, CUTOUT TEMPLATE, MANUAL AND PAINT MASK
|
Specifications
Woofer: 8" Nomex "Stratum" cone, rubber surround, 21.8oz Magnet, 1.4" voice coil, bumped back plate, vented pole piece
Tweeter: Swivel 30 degrees, 1" Silk dome, Ferro-fluid cooled, Neodymium magnet, wide dispersion Crossover: Phonalic PCB board, 12dB woofer section, 18dB tweeter section, Polymide auto protective reset switch for tweeter
Frequency Response: 40Hz- 20KHz
Sensitivity: 85dB
Recommended amplifier power: 10-120 watts
Impedance: 8 ohm
Cut Out size: 250mm
|
VR8-SC - Hi Vi Swan In-Ceiling Speakers
Features:
- 8" 2-way Stereo In-Ceiling Speaker
- SHIPPED WITH GRILLES, FRAMES, CUTOUT TEMPLATE, MANUAL AND PAINT MASK
|
Specifications
Woofer: 8" Nomex "Stratum" cone, rubber surround, 21.8oz Magnet, 1.4" voice coil, bumped back plate, vented pole piece
Tweeter: Swivel 30 degrees, 1" Silk domes, Ferro-fluid cooled, Neodymium magnets, wide dispersion
Crossover: Phonalic PCB board, 12dB woofer section, 18dB tweeter section, polymide auto protective switch for tweeter
Frequency Response: 40Hz- 20KHz
Sensitivity: 85dB
Recommended amplifier power: 10-120 watts per channel
Impedance: 8 ohm
Cut Out Size: 250mm
|
VR5-W - Hi Vi Swan In-Wall Speakers
Features:
- 5.25" 2-way In-Wall Speaker
- SHIPPED WITH GRILLES, FRAMES, CUTOUT TEMPLATE, MANUAL AND PAINT MASK
|
Specifications
Woofer: 5.25" Nomex "Stratum" cone, rubber surround, 12oz Magnet, 1" voice coil, bumped back plate, vented pole piece
Tweeter: Swivel 30 degrees, 0.8" Silk dome, Ferro-fluid cooled, Neodymium magnet, wide dispersion Crossover: Phonalic PCB board, 12dB woofer section, 18dB tweeter section, Polymide auto protective switch for tweeter
Frequency Response: 50Hz- 30KHz
Sensitivity: 85dB
Recommended amplifier power: 10-80 watts
Impedance: 8 ohm
Cut Out Size: 267mm X 182mm
|
VR6-W - Hi Vi Swan In-Wall Speakers
Features:
- 6.5" 2-way In-Wall Speaker
- SHIPPED WITH GRILLES, FRAMES, CUTOUT TEMPLATE, MANUAL AND PAINT MASK
|
Specifications
Woofer: 6.5" Nomex "Stratum" cone, rubber surround, 18.5oz Magnet, 1" voice coil, bumped back plate, vented pole piece
Tweeter: Swivel 30 degrees, 1" Silk dome, Ferro-fluid cooled, Neodymium magnet, wide dispersion Crossover: Phonalic PCB board, 12dB woofer section, 18dB tweeter section, Polymide auto protective switch for tweeter
Frequency Response: 45Hz- 20KHz
Sensitivity: 86dB
Recommended amplifier power: 10-100 watts
Impedance: 8ohm
Cut Out size: 276mm X 189mm
|
VR8-W - Hi Vi Swan In-Wall Speakers
Features:
- 8" 2-way In-Wall Speaker
- SHIPPED WITH GRILLES, FRAMES, CUTOUT TEMPLATE, MANUAL AND PAINT MASK
|
Specifications
Woofer: 8" Nomex "Stratum" cone, rubber surround, 21.8oz Magnet, 1.4" voice coil, bumped back plate, vented pole piece
Tweeter: Swivel 30 degrees, 1" silk dome, Ferro-fluid cooled, Neodymium magnet, wide dispersion Crossover: Phonalic PCB board, 12dB woofer section, 18dB tweeter section, Polymide auto protective switch for tweeter
Frequency Response: 40Hz- 20KHz
Sensitivity: 87dB
Recommended amplifier power: 10-120 watts
Impedance: 8 ohm
Cut Out size: 326mm X 223mm
|
VR5-LCR - Hi Vi Swan In-Wall Centre Speaker
Features:
- 5.25" In-Wall Video ShieldedLeft, Center or Right Channel Speaker
- SHIPPED WITH GRILLES, FRAMES, CUTOUT TEMPLATE, MANUAL AND PAINT MASK
|
Specifications
Woofer: 5.25" Nomex "Stratum" cone, rubber surround, 12.3oz Magnet, 1" voice coil, bumped back plate, vented pole piece
Tweeter: Swivel 30 degrees,1" silk dome, Ferro-fluid cooled, Neodymium magnet, wide dispersion Crossover: Phonalic PCB board, 12dB woofer section, 18dB tweeter section, polymide auto protective switch for tweeter
Frequency Response: 50Hz- 20KHz
Sensitivity: 85dB
Recommended amplifier power: 10-80 watts
Impedance: 8 ohm
Cut Out Size: 416mm X 188mm
|
|
